| Sadolin U-pox Micaceous Iron Oxide is a sparkly 2 component Epoxy Primer comprising of a base pigmented with Micaceous Iron Oxide and hardener. The Micaceous Iron Oxide enhances the products barrier properties and since it is chemically inert it gives a coating that has excellent corrosion protection and long term durability. It is suitable for all steelwork such as bridges and industrial buildings. It may also be used for coating welded areas between joined galvanised sheets and for patching defects in galvanised surfaces. |
| Surfaces to be protected must be free of rust, mill scale, oil and grease. Sandblasting is preferred method of surface preparation. Welding seams, rivet heads and sharp edges should first be spot-primed before applying the primer. When used as a "shop primer" a dry film of 10-15 microns imparts protection without impeding welding. |
| |
| Matt. |
| May be applied by brush or spray gun. When spraying, the airless system is preferable since heavy layers must be applied. If low pressure pot system is used, viscosity of the mixture must be reduced. The mixture must be stirred during use; if applying by spray, use of a mechanical stirrer is advisable. |
| Use only Sadolin U-pox Thinner series 803-0218 for dilution cleaning of brushes and spraying equipment. |
| Touch dry in 1-2 hours, through dry in 24 hours; ready for over coating in 24 hours. |
| Silver Grey, Metallic Blue and Metallic Green. |
| 3-6 Square metres (32-64 square feet) per litre of mixed components in film thickness of 70-80 microns DFT. |
| 1 litre, 4 litres |
| Highly Flammable, Toxic, Harmful to the environment |
| |
Back to Main Industrial Paints page |
